BrilliantPad Self-Cleaning Automatic Potty Pad Machine Replacement Rolls, 2-pack

Pad Roll Installation

1. Prepare the take-up assembly by snapping a Gear Cap onto each end of the Take-up Rod.

2. Drop take-up assembly into waste area near Control Module. Gear Cap will mate to Control Module gear.

3. Put Pad Roll into supply-chamber. Be sure roll feeds from the bottom, not the top. Then pull roll 3 to 6 inches past the take-up rod. When properly installed the white absorbent surface will face the ceiling and the colored plastic lining will face downwards to the platform.

4. Tuck paper into upwardly facing clips on each end of the Take-up Rod.

5. Press the Pad Advance button on the Control Module to roll up the paper. If the Pad Rolls slips out of the clips, re-insert the Pad Roll into the clips.

6. Hold Pad Advance button on the Control Module until paper rotates backwards around the rod several times.

7. Close the Supply and Waste Covers.

8. Rotate latches to secure the Waste and Supply Covers.

Soiled Roll Removal

1. When fresh Pad Roll supply is empty, unlatch and open the Waste Cover to access the soiled Pad Roll.

2. Simply lift the entire roll assembly from the machine and dispose in trash. The plastic backing provides a clean grasp surface and the Gear Caps prevent waste from leaking or spilling.