Loading...
Loading...

Catit Design Senses Drinking Fountain, 100-oz

  • Price:

    $17.43 FREE 1-2 Day Shipping over $49

In stock
cw-icon-heart Created with Sketch. Add to Favorites
Description

Nothing puts a crimp in a cat's good mood like waking up from a tough day of napping to discover the water bowl's filled with stagnant, warm water. The Catit Design Senses Drinking Fountain keeps cats happy with fresh, filtered water that's always cool and ready for drinking! This 5-Star fountain has a soft water filter that removes extra calcium and magnesium from tap water to protect your pal's lower urinary tract. 

Key Benefits
  • Large water-to-air surface maximizes oxygenation for fresher, better tasting water
  • Re-circulating system cools and aerates water all while consuming less than 4 watts, using less power than a night light
  • Advanced filtration purifies water by absorbing water impurities such as debris, food, hair and sediment as well as extra calcium and magnesium from tap water to protect your kitty's lower urinary tract
  • Dishwasher safe
  • Water capacity: 100 fl oz (3 L)
What's Included

Catit Design Senses Fountain (1) foam/carbon/ion exchange resin Water Softening Filter.

†Capacity is calculated by total volume. When using container, choose a capacity greater than what you need to prevent overfilling and spills.

See all items by Catit

  • Item Number
    68579
  • Brand
    Hagen
  • Capacity (Max)†
    3/4-gallon
  • Material
    Plastic
Instructions

Weekly Maintenance Tips:

Wash and rinse fountain with a soft sponge and a non-abrasive cleanser. Rinse thoroughly, ensuring no soapy residue. Remove the filter from the base and rinse. Do not wash the filter with soap. If filter contains excess debris or other foreign matter, replace it (replacement filters sold separately).

The filter should be replaced every 3 weeks or when there are visible signs that the filter is saturated with foreign matter (debris, food, hair, etc.) More frequent changes may be necessary due to indoor environmental and water conditions, as well as multiple pet use.

Should pump appear dirty, open pump and remove impeller cap and impeller. Remove any debris from the impeller and clean impeller well with cotton swab. Handle impeller with care.

FAQ

My pet seems afraid of the unit. What should I do? Although the majority of pets readily accept using the fountain, your pet may be intimidated by the unit at first. It is important to encourage drinking from the fountain. Remove other water sources for a limited amount of time. Your pet will become accustomed to the unit within a few days. It is imperative to monitor your pet’s use of the fountain at first to ensure that he is drinking to avoid dehydration.

How often should I fill my unit? Refill frequency is dependent on many factors, including how much your pet drinks, how many pets use the fountain, and the environmental conditions where the unit is located. There will be more water evaporation in a dry, warm area versus a cool area.

Once the filter has been installed, for how long should I run the fountain before hard water is softened? Run the fountain for approximately 60 minutes to soften the water and remove calcium and magnesium present in tap water.

Why is the unit making gurgle sounds? The gurgle sounds are an indication that the water level is very low. Refill immediately (refer to filling instructions). Never let the unit run dry.

My unit has a white film on it. What is it and how can I remove it? The white film is a lime mineral deposit resulting from hard water. To remove these stains, soak affected areas in a vinegar solution to loosen deposit. Remove by wiping with a soft cloth. Ensure to rinse thoroughly.

Why is the water not pumping properly through the unit? There may be some foreign matter (food, hair, debris) trapped in the filter, or pump, that may be causing this problem. Examine the filter. Should it be saturated with foreign matter, it must be replaced. Should the filter appear in functioning order, check the pump carefully. You may need to open the pump and clean out the interior for it to function properly (refer to cleaning instructions).

I plugged in the unit, but there is no water flowing. What should I do? There could be air trapped in the pump, preventing it from functioning properly. To remove air from the system, repeat the process of unplugging and plugging in the unit until the water begins to flow

Warranty

2-Year Limited Warranty.

349 Reviews 349 Reviews 4.3 out of 5 Stars

89% Recommend

89% of reviewersrecommend this product

4.3 / 5

You've Already Reviewed This Item