Pet Lovers Also Bought
3 Customer Questions
where does the charger connect to the power stick?
Answer by • Dec 08, 2018
To replace the powerstick, check the black activation switch, which is located on the base assembly, is in the “OFF” position. Use a 7/16” or 11mm socket, nut driver, or wrench to remove the nut at the bottom of the base, below the perch ring. Remove lock washer, hub (grooves engage perch ring), perch ring, and green or clear plastic friction disc. Remove the Power Stick from the base assembly by pulling the Power Stick upward. Note: The black switch bumper is glued to the base assembly at the factory. If the switch bumper separates from the base assembly, it will be necessary to glue it back into place. Remove any residue remaining and apply a small amount of Super Glue®, Krazy Glue®, etc. to the smaller slot in the base assembly and slide the switch bumper in place. The top of the switch bumper should be flush with the top rim of the base assembly. Please wait a few minutes for the glue to dry before installing the Power Stick.
Does item include the charger to recharge unit?
in your notes above..charged with the included adapter and built-in input jack
Answer by • Aug 20, 2019
The AC/DC adapter is included with the Droll Yankees Yankee Flipper Motorized Bird Feeder. This item is the replacement power stick. A new AC/DC Adapter can be purchased through the manufacturer.
My flipper is probably 8 (+) years old. In moving, my charger got lost. Can I get a replacement charger ? Will the power stick work in my old unit ?
Answer by • Jul 05, 2018
This replacement is compatible with the older unit, is powered by nickel-cadmium batteries, and the motor is rechargeable with a built-in jack.