Make sure your pets always have clean, clear, fresh water with the Easy-Clean Water Bowl Dog, Cat & Livestock Auto-Fill Water Bowl Heat Cable. This American-made heating cable keeps your best animal pal’s water from freezing over in the winter months. With a featured thermostat that automatically turns the power on and off at temperatures just above freezing, you can rest assured that your animals always have access to the water they need to thrive. Plus, this easy-to-install bowl can be set-up in just 5 minutes, so you can spend less time tinkering with your pet’s bowl and more time enjoying their company!
9-ft and 12-ft cables are the perfect length for bowls stationed on fences or gates.
This low-wattage heating option can help you save money and energy during the winter.
Built-in mounting posts on the underside of the water bowl make setting up this cable a breeze.
Designed to work even under extreme conditions such as in sub-zero temperatures and environments.
Keeps water just warm enough to prevent freezing, don’t have to worry about it being too warm.
Click here for The Easy-Clean Water Bowl Dog, Cat & Livestock Auto-Fill Water Bowl with Hose.
The Easy-Clean Water Bowl Dog, Cat & Livestock Auto-Fill Water Bowl has slots on the underside of the bowl to hold a loop of the heat cable. The remainder of the cable is to run along the supply hose, which leads into the valve box to prevent the valve and hose from freezing. Place the water bowl upside down on a flat surface. Begin with the cable next to the thermostat and place the cable in a pattern as shown in the photo included in the instructions you will receive with your cable. Insert the provided screws into the holes of the mounting posts to anchor the cable to the bowl. Use the electrical tape provided to tape the cable to the hose at 4-6 inch intervals. Leave a little slack between the bowl and hose to allow for the opening and closing of the float chamber.