FOR CONTROL OF FLEAS AND TICKS: � Follow "FOR BEST RESULTS" in the "BEFORE YOU USE" section above. � To control the source of flea infestations, dogs should be treated by a veterinarian or with a product approved for application to dogs. � Use "spray" nozzle setting for broad area applications. Thoroughly spray around dog resting areas, localized areas of floor and floor coverings (including dog bedding if it cannot be washed) where fleas and ticks may be present. Spray until damp but not soaking. Repeat as necessary. � Use "stream" nozzle setting for cracks and crevices and void area applications. Thoroughly spray cracks and crevices, along and behind baseboards and window and door frames in close proximity to dog resting areas. Repeat as necessary. � Expose as many pests as possible. � Readytouse. Do not dilute. � DO NOT USE ON CAT BEDDING. For use on dog bedding only. � Do not apply directly on dogs. � This product contains plant oils which are inherently fragrant. For people and/or dogs that are sensitive to fragrances, test a small application before using over a larger area. � While staining is unlikely, as with most household products it is recommended to test for possible staining on an inconspicuous area on surfaces to be sprayed. A test duration of 48 hours or more is recommended. Do not spray on wood furniture, floors or trim as water spotting may occur. This product is not recommended for use on vinyl siding, or window or door casements made of vinyl moulding. � FOR BEST RESULTS FOR FLEA PROBLEMS: Before using this product, vacuum infested rooms thoroughly including carpet, rugs, flooring and upholstered furniture. Take vacuum outside and remove vacuum bag, seal in a plastic bag and dispose in the outdoor trash immediately. Wash dog bedding and removable furniture covers. FOR INDOOR APPLICATIONS TO CONTROL OTHER PESTS: � Use "spray" or "stream" nozzle setting depending on size and location of areas being treated. See nozzle settings information above. � Spray areas where pests are found, live and hide, including cracks and crevices in walls/cabinets, beneath and behind builtin appliances, sinks, cabinets, around plumbing pipes, garbage cans, window frames and doorways and in attics, basements and crawl spaces. � Expose as many pests as possible. Repeat as necessary. FOR OUTDOOR APPLICATIONS: � Use "stream" nozzle setting. � Apply around window frames and doorways, around vents, openings where utilities enter home, and other possible entry points into home. � Apply to problem areas such as around wood piles, storage sheds and other areas of pest infestation. Spray on ant trails and mounds. Spray until thoroughly and uniformly wet. � Expose as many pests as possible. Repeat as necessary. � For an outdoor perimeter foundation treatment, use EcoSMART�'s Insect Killer Spray for Lawns and Landscapes 32 oz. hose end product. SPRAYING : � Turn nozzle to ON "Spray," or ON "Stream" position, before using. � Hold container upright while spraying. Spray about 8 to 12 inches from surface being treated. � Apply with a backandforth motion to carpets, rugs and upholstered furniture. Spray until damp and allow to dry. Avoid wetting or saturating surfaces. Let dry after applying. � Expose as many pests as possible. PRECAUTIONARY STATEMENTS: This product is safe for use around children and dogs when used as directed. Caution � We recommend good safety practices when using any pesticides, such as avoiding contact with eyes and skin and keeping out of the reach of children and dogs. If product gets in eyes, flush with water. If on skin, wash with soap and water. If irritation persists, contact a physician. Do NOT apply directly on dogs. STORAGE & DISPOSAL: Turn nozzle to OFF position. Store in original container in a cool, dry area and avoid excess heat. Keep from freezing. Do not reuse container. Offer for recycling if available or discard in trash.