Fish Mate P21 Pond Fish Feeder

  • List Price:

    $82.73

  • Price:

    $39.99 FREE 1-2 Day Shipping over $49

  • You Save:

    $42.74 (52%)

In stock
cw-icon-heart Created with Sketch. Add to Favorites
Description

Keep your fishy friends fed and happy, even when you’re away from home with the programmable convenience of the Fish Mate P21 Pond Fish Feeder. The perfect size to feed fish populations in both small ponds and large aquariums, this automatic feeder has fully adjustable time and quantity settings, allowing food to be dispensed over a period of several hours for as many as 21 consecutive days. The Fish Mate P21 Fish Feeder not only makes your life easier by taking care of feedings for you, it is also great for the health and happiness of your fish, keeping them active throughout the day, while also preventing the dangers of overfeeding. It’s fully weatherproof and can be easily attached to your aquarium or pole-mounted at the edge of your pond.

Key Benefits
  • Perfect for automatically feeding fish populations in both small outdoor ponds and large in-home aquariums.
  • Low-cost and energy-efficient operation, thanks to being powered for over a year of use with one AA battery.
  • Feeding times and quantities are fully adjustable, allowing for multiple feedings for up to 21 consecutive days.
  • Feedings can be spaced out over several hours, keeping fish active and reducing the risk of them being overfed.
  • Safe, effective and continued use ensured with reliable and accurate quartz timer and battery condition indicator.
Precautions

This feeder is not designed to be immersed in water. Such action will invalidate the guarantee.

See all items by Fish Mate

  • Item Number
    136274
  • Dimensions
    7.25 x 3.5 x 6.87 inches
  • Aquarium Type

    Pond

  • Brand

    Ani Mate

Instructions

Operation

  1. Remove battery cover at rear by levering back edge with a coin, insert battery and switch on timing mechanism. Check battery operation by visible movement of gearwheel near "Battery Check". Replace battery cover.
  2. Depress front cover retainer on side of feeder and hinge back.
  3. Remove clear hopper lid by pulling on its edge and fill hopper body with the required food. Fill only between baffles. Do not overfill. Replace hopper lid ensuring it is fully clipped down onto hopper body. Set Feed Control. Shut front cover.
  4. Set required time delay to start of daily meal by rotating hopper anti-clockwise through bottom of feeder. If the hopper has been set for the meal to start in approximately 6 hours, food will then be dispensed gradually over a period of approximately 5 hours, as this is best for the fish. Place feeder in its operating position.

Feed Control The Fish Mate P21 feeder is particularly suited for use with floating food sticks, but is also suitable for use with all popular fish foods. However, care is required to use the correct baffle and "FEED CONTROL" setting to obtain the consistently correct meal size. The table in the User Guide will serve as a guide, but it is always best to test.

Please consult your fish food instructions or aquatic dealer to ascertain the exact amount of food for your fish. The correct baffle is easily fitted to the hopper body by sliding in/out of its recess in the hopper body. The maximum number of meals will normally range from about 40 for a small pond or aquarium to 8 for a large pond.

Testing your FISH MATE feeder before use

Your Fish Mate feeder is made from top quality materials, and is assembled to comply with rigorous quality standards. However, Fish Mate does recommend that before use you supervise its correct operation and feed setting over a period of at least 3 days.

To test the feeder, fill it with your normal fish food and leave to operate over a bowl or similar receptacle, so that the correct timing and amount of food dispensed can be observed. Note that manual rotation of the hopper does not give a true indication of the meal size, due to the very different speed of rotation.

If leaving your fish for long periods, we do recommend that someone periodically checks the feeder to ensure that all is well.

Mounting of Feeder

Ponds: It is recommended that the feeder is positioned about 25-30cm (10-12 inches) above the pond water level, and at least 20cm (8 inches) in from the edge of the pond. If the feeder is sited too low problems may be experienced with excessive moisture caused by rain splashing up under the feeder. If the feeder is too high or too near the edge of the pond, the food may be blown away from the water.

The feeder may be mounted using its quick release bracket or the hanging loop. It is normally recommended to use the bracket which may be attached, with the screw supplied, to a suitable length of wooden, metal or plastic post of approx. 30mm square (1 1/4 inches square). The post may be driven into the ground at any angle, but the end of the post should be cut vertically or horizontally before attachment of the bracket, in order to ensure that the feeder base is parallel to the water. "In Pond" location may be provided by setting a vertical post in concrete. (The concrete should be chemically neutralized before placing in the pond). Ensure there is sufficient concrete to provide a stable base for the feeder.

Aquariums: The feeder bracket may be bonded to the aquarium glass in the required position using silicone sealant. The bottom of the feeder should be at least 25mm (1") above the water surface, as excessive humidity may cause food to stick.

Maintenance

Your Fish Mate pond feeder should require no maintenance. However, care should be taken to prevent food getting into the mechanism behind the hopper. It is not recommended that the feeder is left outside during prolonged periods of wet weather.

Warranty

3-Year Limited Warranty.

>
Customer Reviews
3 Reviews 3 Reviews 1 out of 5 Stars

33% Recommend

33% of reviewersrecommend this product

1 / 5

You've Already Reviewed This Item

Showing 3 Reviews

Sort by:
Filter by:
  • not reliable

    By on

    So far I can not get this to work. Directions are not clear. does not give enough feeding options. I will work on it with my tester today...may be defective. very cheaply made.

    You liked it! Something went wrong. Please try again later. Report
  • Pond Fish Feeder

    By on

    Does not work!!! Very cheaply made. Could not get the feeder to dispense food.

    You liked it! Something went wrong. Please try again later. Report
  • Fish feeder

    By on

    I can't make it work!!! I have tried everything and it still doesn't work.

    You liked it! Something went wrong. Please try again later. Report