Garmin Delta Sport XC Dog Training Collar with BarkLimiter Bundle

  • Price:

    $219.99 FREE 1-2 Day Shipping on this item

In stock
cw-icon-heart Created with Sketch. Add to Favorites

Customize your dog training experience with the versatile and easy-to-use Garmin Delta Sport XC Dog Training Collar with BarkLimiter Bundle. With a handheld controller that features an intuitive triple-button design and bright LCD display, five available correction configurations, and an effective range of up to three-quarters of a mile, this dog training system gives you the control you need with refreshing simplicity. You can select the training option that works best for you and your pup, thanks to 36 different levels of continuous or momentary stimulation, the use of tone or vibration, and the ability to work with up to three dogs at a time. This electronic collar system is the perfect way to take your dog training to the next level!

Key Benefits
  • Comes with interchangeable long and short contact points to ensure a custom training experience for any dog breed.
  • Ergonomic and intuitive 3-button handheld remote comes with easy-to-read LCD display quick and easy system control.
  • Range of up to 3/4 mile to correct negative dog behavior with 36 levels of stimulation, plus tone and vibration.
  • Customize each dog training session for different behavior issues with 5 available varying correction configurations.
  • Included built-in BarkLimiter technology in unit’s handheld remote helps to eliminate unwanted and excessive barking.
What's Included

Delta Sport XC handheld, Delta Sport XC dog device with built-in BarkLimiter, Black 3/4-inch collar strap, Contact point set (long and short) with wrench, Charging clip, Lanyard, USB cable, AC adapter, Owner’s Manual.


To prevent irritation from the contact points, remove collar for at least eight hours out of every 24-hour period.

See all items by Garmin

  • Item Number
  • Material

How do I find the proper fit for my dog?

  • Place the collar around the middle of the dog’s neck.
  • Position the device at the front of the dog’s neck, with the status LED facing forward toward the dog’s chin and the contact points against the throat.
  • For bark correction, the device contact points should be positioned near the dog’s vocal cords. This location varies based on the breed of dog. If the device does not seem to detect the dog’s barks, you should move the device closer or farther from the dog’s body to find the ideal location.
  • Tighten the strap so that it is very snug around the dog’s neck, and fasten the buckle.
  • The collar should fit tightly and should not be able to rotate or slide on the dog’s neck. The dog must be able to swallow food and water normally. You should observe your dog’s behavior to verify that the collar is not too tight.
  • Wiggle the device to work the contact points through the dog’s coat.
  • The contact points must have contact with the dog’s skin to be effective.
  • If the strap is too long, cut off the excess, leaving at least 3 inches (8 cm) to spare.
  • You can mark the hole used to fasten the buckle for future reference
Handheld Remote Dimensions2.1 x 5.4 x 1.1 inches
Handheld Remote Weight3.7 ounces
Receiver Device Dimensions1.5 x 2.3 x 1.5 inches
Receiver Device Weight2.3 ounces
Collar Compatibility.75 (3/4) inch
Handheld Remote Battery Life 80 hours per charge
Receiver Device Battery Life 60 hours per charge
Range.75 miles
Water Resistance RatingIPX7
Handheld Remote FloatsYes
Receiver Device FloatsNo
Autorise Bark CorrectionYes
Correction Levels36
Momentary/Continuous CorrectionYes
Vibration CorrectionYes
Tone CorrectionYes
Training Configurations5

What do I do if my collar will not charge?

  • Inspect the charging clip and AC adapter or vehicle power cable for any damage and replace if necessary* Try removing and reconnecting the charging clip to the collar* Make sure the charging contacts are clean and dry* Refer to your Owner’s Manual for general collar cleaning instructions

What do I do if my collar will not power on?

  • Press and hold the power button for up to 60 seconds* Make sure the battery is charged* Attempt to power the collar on while connected to a power source* If the collar powers on, leave it plugged in to charge the battery* If the collar powers off immediately when disconnected after attempting to charge, the battery may need to be replaced.

What is Autorise Bark Correction?

The Autorise mode is designed to provide the proper level of stimulation correction to prevent excessive barking. When a dog barks, it will be corrected by the device with stimulation. It will only send one correction within a four-second window to give the dog a chance to respond. If the dog continues to bark, the collar will increase the intensity level of the stimulation reaching the highest level within 30 seconds. Should the dog refrain from barking, the device will slowly decrease the intensity level reaching the lowest level within 30 minutes. This ensures the dog is corrected at the right level.

What do I do if my dog Continues to bark while wearing a BarkLimiter Series Device?

Extensive research has been performed to create the AutoRise function that automatically increases intensity as the dog continues to bark. While this feature works for most dogs, some dogs learn to manipulate the system so that they receive minimal correction. If your dog is failing to respond to the collar, avoid using AutoRise and manually set the stimulation level for your dog to ensure he receives the correct level of stimulation on a consistent basis. Reference the latest instructions on manually setting the stimulation level in your Owner’s Manual. If the dog continues to show no reaction to the collar, it is possible that the collar may be too loose to provide consistent stimulation. Consistent stimulation is necessary to provide consistent training, which leads to consistent results.

Should I leave the device on while my dog is eating?

To prevent discomfort to a dog while it is eating, removal of the collar is recommended. This can be coordinated with the eight-hour break every dog should receive from the collar as indicated in your Owner’s Manual. As an alternative, you can ensure the device is not in BarkLimiter mode before feeding the dog.

How do you check the Battery status?

Rotate the dial away from N. The color of the status LED will now indicate battery charge level for 5 seconds.

What do the BarkLimiter Series Light Sequences mean?

The BarkLimiter dog collars will display different light sequences to let you know the status of the collar while in use or during charging. The different colors and flashes are described in the tables below.* Battery status light:


The battery has good charge;


Battery should be charged or replaced soon;


Battery depleted and bark correction disabled* Bark Correction:

Short Green Flash:

Motion detected but no correction applied;

Long Green Flash:

Bark detected and correction applied* Light sequences when charging:

Solid Red:


Solid Green:

Fully Charged


Customer Reviews

3 Reviews 3 Reviews 2.3 out of 5 Stars

Filter reviews by star rating

67% Recommend

67% of reviewersrecommend this product

2.3 / 5

You've Already Reviewed This Item

3 Reviews

Showing 3 Reviews

  • 3 out of 5 stars

    nice but not for me

    By on

    I have two Great Danes and I am used to a different brand that allows you to work with two dogs at the same time without switching settings on the controller. The reason I gave it three stars was because the screen on the controller acted funny when I toke it off the charger. It cleared up but I was not comfortable keeping it and feeling it would not do it again. Unfortunately chewy does not sell the other brand so I bought a new set of the other brand on a different site. After a day to charge and see I was not happy with it it toke less then two minutes to receive a return label. I made the phone call to return it and my package was ready to go back quick and easy as always.

    You liked it! Something went wrong. Please try again later. Report
  • 1 out of 5 stars

    Works only with full charge?

    By on

    Instructions say “sometimes” interference will cause collar not to work. Well 2ft away from my dog in my backyard or at the park walking it’s a coin toss if i’m going to be able to train my dog that day. The only time it works most consistently (being clear this means it’s still not 100% that it will work) is directly off a full charge. Will try and return or replace cause this isn’t working for the cost.

    You liked it! Something went wrong. Please try again later. Report
  • 3 out of 5 stars

    Needs new collar

    By on

    I wish the collar was stronger my dog has already chewed through the collar and he can't wear this now until I order a new collar to fit. But when he was wearing the device it worked great and he was very responsive to the training. He is a very large very strong animal and most shock collars don't even get his attention.

    You liked it! Something went wrong. Please try again later. Report