Clean the walls with a soft cloth and diluted cleaning solution.
Do not clean with powders, thinners, benzine solutions or cresol solution.
Clean the panels with a damp cloth.
Clean the cage once a month.
- Assemble the side panels and set onto the base. Make sure the panels are right side up by checking the illustrations of the parts list. Make sure that the horizontal wire is on the outside of the product.
Locking the latch: Hook latch onto vertical wire and press down.
Connecting the panels: Set panels onto base. Place the panels onto the rib on the base. Attach connector onto one panel. Press down on the connector.
Removing the connectors: Match up cover to hole and twist (2 locations).
Position the panels and spread floor covering. The side with the small notch is the "back". Lay at least 2 inches of floor covering in the base.
Assemble the treadmill, water bottle, and house.
Attaching the treadmill: Place treadmill on stand. Twist notch. Treadmill can also be put between panel wires. Twist the notch to lock in to fence.
Installing the water bottle: Put the bottle hook into the side panel. Fill bottle and secure with spigot. Attach the bottle to the bottle hook. Do not fill bottle 100% full. If the bottle is completely full, this creates a vacuum, not allowing water out; leave some room in bottle. Be sure to change water daily.
- Attach the desk and ladder and finish by attaching the roof. Place the food tray on the deck, and finish by attaching the roof. Press down until you hear the "click".
Attaching the treadmill: Line up where to hang the deck. Left hook goes over the wire. Right hook goes beneath. Side hooks go over the wire.
Installing the ladder: Install from above the deck until you hear a "click".