Pawbo Wi-Fi Interactive Pet Camera & Treat Dispenser, Pink

Pawbo Life Three-Step Easy Set Up

• Step 1: Download Pawbo Life app (orange icon) on iOS or Android platform.
• Step 2: Connect Pawbo⁺ through Pawbo Life app.
• Step 3: Connect to your home WiFi.

Requirements

• Easy to use and set up from your mobile device (App supports iOS 8 or later (iPhone, iPad and iPod) and Android 4.0.3 or later version.
• Wi-Fi environment required 802.11b/g/n(2.4GHz) connectivity with WPA2-AES encryption.

Yes, Pawbo Life App supports more than one Pawbo⁺ device.

We believe that night vision images and video clips do not accurately portray your pet.

awbo Life app is available for both iOS and Android.

Our concept is to provide "treats" not "meals". Our specially designed treat dispenser allows you to watch and reward your pets at the right moment.

Tap anywhere in the middle of the screen to hide function buttons on the screen, tap again and they will reappear.

When Pawbo⁺ receives a feeding command, the motors are activated. To protect the life span of the motor, there is a 3 second interval in between receiving each command.

Exiting the app will cause video recording to stop, unless someone else is still connected to your Pawbo⁺.

To limit file size and excessive time required to sync files, a single video will automatically stop after 15 minutes of recording.

When I connect to Pawbo⁺, video recording is initiated before I press the video recording function. Pawbo⁺ supports up to 8 simultaneous connections. Please check if someone else is connected. When more than 1 person is connected to Pawbo⁺ simultaneously, if one person presses the video recording function, the recording icon will also appear on the other person's screen.

Photos are stored directly to mobile phones. When two people access at the same time, they can both take pictures and simultaneously access to share or post pictures.

In your Pawbo Life App settings, select “QR code”, then store the QR code to your mobile device. You can share the access of your Pawbo⁺ with your family members by sending them the QR code along with your Pawbo⁺ password.

Your password is stored on your Pawbo⁺ device not in other server system. If you forget your Pawbo⁺ password, please reset it by pressing the reset button at the rear of the device with a pin or needle for 10 seconds until a blinking green light appears while Pawbo⁺ is plugged in. Please note after the reset, your Pawbo⁺ settings will be restored to default and you will need to setup again.