PetSafe Pawz Away Threshold Indoor Pet Barrier

  • List Price:

    $109.99

  • Price:

    $94.92 FREE 1-2 Day Shipping on this item

  • You Save:

    $15.07 (14%)

In stock
cw-icon-heart Created with Sketch. Add to Favorites
Description

Set boundaries in your home with PetSafe’s Pawz Away Threshold Indoor Pet Barrier. Mount or place this device in your home to let your pet know that certain areas are off limits. As he approaches the barrier wearing the paired collar, he will hear a series of beeps before receiving progressive static correction. Soon your furry friend will know where he’s allowed to go and where he isn’t. The barrier covers up to 31-inches radius and can be mounted horizontally to a stair or wall, or simply placed on the floor!

Key Benefits
  • Helps keep pets away from stairs, rooms and other areas in your home.
  • Mount it horizontally on a wall, a step or lay it flat on the floor.
  • Starts at the lowest level, increases in 3 seconds and has an automatic safety shut-off that makes the correction stop after 15 seconds.
  • Suitable for paw-tner’s over 5-pounds and under 40-inches tall with neck sizes between 6 and 28-inches.
  • Releases signal up to 31-inches away from the barrier.

See all items by PetSafe

  • Item Number
    166236
  • Breed Size
    Small Breeds, Medium Breeds, Large Breeds
  • Lifestage
    Adult
  • Material
    Plastic, Nylon
Instructions

Troubleshooting

Threshold Transmitter does not appear to work.

  • Press Mode button and verify Green light turns ON when button is pressed. Check that the Low Battery Indicator is not flashing Red.
  • Check/replace batteries in Threshold Transmitter and Receiver Collar.
  • Move the Receiver Collar closer to the Transmitter to test operation.
  • If you hold the Mode Button longer than 5 seconds, the Transmitter will turn off.

Barrier Area range is too low.

  • Check/replace batteries in Receiver Collar and Transmitter.
  • Adjust Threshold Transmitter level to increase Barrier Area size.

Barrier Area range is too high.

  • Adjust Threshold Transmitter level to decrease Barrier Area size.

Pet seems to receive no stimulation.

  • Check/replace batteries in Receiver Collar.
  • Use Test Light Tool to check for static correction.
  • Check Receiver Collar fit to ensure Contact Points have direct skin contact.
  • Check the setting on the Threshold Transmitter.

Unable to hear Receiver Collar tone.

  • Check/Replace batteries in Receiver Collar.
  • Pets easily hear tone but it may be a volume level that is difficult for you to hear.
  • Use the Test Light Tool to check Receiver Collar for Static Correction.

No LED light on Threshold Transmitter.

  • Press and hold the Mode Button until the Green LED light is ON.
  • Check/replace batteries in Threshold Transmitter.
FAQ

How does it work?

The PetSafe Pawz Away Threshold Pet Barrier keeps your pet from entering or leaving a certain room, from going up or down stairs, off of furniture, etc. Just place the Threshold Transmitter near the area your pet should avoid. The Threshold Pet Barrier transmits an adjustable elliptical radio signal. Your pet wears a Receiver Collar with Contact Points that touch his neck. When your pet enters the Barrier Area, he’ll hear a series of audible tones from the Receiver Collar and he will feel a safe Progressive Static Correction, delivered through the Contact Points on his neck. The Progressive Static Correction will get his attention, but will not cause harm. The correction continues until your pet leaves the Barrier Area. The PetSafe Pawz Away Threshold Pet Barrier has been proven safe, comfortable, and effective for pets at least 6 months old and 5 pounds or more.

Warranty

1-Year Limited Warranty.

Customer Reviews

1 Review 1 Review 5 out of 5 Stars

Filter reviews by star rating

100% Recommend

100% of reviewersrecommend this product

5 / 5

You've Already Reviewed This Item

1 Review

Showing 1 Review

  • 5 out of 5 stars

    It worked!

    By on

    Only needed it for a few days. My dog won't go up the stairs now.

    You liked it! Something went wrong. Please try again later. Report