LvLrister UB100 Ultrasonic Dog Bark Control Device, Small, Silver Gray

Instructions: Point the UB100 toward the pet from a distance of about 5 feet up to 16.5 feet away. Push the Low/High frequency buttonand press the tone button for 1 or 2 seconds while giving the desired verbal command. Repeat as necessary until the pet responds to your command as desired. Training: The UB100 can help emphasize verbal commands to sit, heel, stay, come, quiet, stay down or any other trained response for your pet. UB100 may also be used as the signal for a trained response such as calling back your dog from a long distance.

Behavior Modification: The UB100 can reinforce corrective commands to keep a pet off the furniture, stop jumping up on people, stop excessive barking or caterwauling, stay out an area or stop clawing, biting, scratching and chewing.

Protection: The UB100B can also be used to keep stray or unleashed dogs from approaching. 1. Point theUB100 toward the aggressive, approaching animal. 2. Press the button and activate UB100 for 1 to 2 seconds 3. Repeat as necessary to repel or stop the animal.

Training Tips Always use positive reinforcement techniques when training with the Petdiary UB100. Best results are obtained when the UB100 is pointed in the direction of the pet being trained. Some pets respond instantly, while others may require more time. Be consistent and repetitive. As a pet's response to commands improves the UB100 may be required less frequently. Effectiveness may vary due to each pet's age, temperament, and hearing ability. Deaf pets will not respond.