XYZReptiles Boa Constrictor Reptile Starter Kit

Once out of the box assembly is a simple process. The Heat pad goes on the outside bottom of the tank. Remove adhesive back and apply to the glass bottom. The rubber feet go on the four corners of the tank to raise the base up of the heat chord and allow ventilation beneath the tank. The bedding goes in first followed by placement of the cave and the water bowl. The moss needs to be dampened and placed inside the hide spot. The jungle vine can be put in any configuration arounf the tank while the thermometer needs to be fixed to the tank inside wall near the hide spot. For cleaning somply remove everything except the heat pad. Use terrarium cleaning products to wipe down the glass interior and exterior. When done replace everything but use fresh bedding and fresh moss.