*Choose a location in your aquarium for the Aqueon Flexible LED Bubble Wand. If placing on the aquarium bottom, remove all gravel and debris from chosen location. Attach Aqueon Flexible LED Bubble Wand to bottom of aquarium with suction cups. Female Transformer Connector should remain dry. DO NOT submerge Female Transformer Connector in aquarium water.
*Connect airline tubing (not included) to airline inlet on the Aqueon Flexible LED Bubble Wand.
*Connect opposite end of airline tubing to check valve (not included). Connect an additional piece of airline tubing from opposite end of check valve to the air pump (not included) output. Follow manufacturer's instructions, warnings and safeguards when installing the air pump.
*Connect Female Transformer Connector on Aqueon Flexible LED Bubble Wand to Male Transformer Connector on the transformer.
*Plug in air pump power cord and Aqueon Flexible LED Bubble Wand transformer into a GFCI outlet utilizing a drip loop.
*Every week, remove gravel or debris that may have covered the airstone to ensure best possible performance.
*Every week, use a soft, non-abrasive cloth to remove any algae buildup on LED lights and airstone.
*Follow manufacturer's instructions to periodically clean and maintain air pump.
*Periodically check airline tubing to make sure no water, debris or condensation has settled in. If there are any obstructions, remove airline tubing, soak in 50-50 vinegar-water solution for 10 minutes, Rinse thoroughly with room temperature water and allow to air dry completely. Reattach airline tubing.