PawsPik Indoor Electric Heated Cat & Small Dog Bed, Sherpa Lined, Charcoal & Ivory, Small

Wash Instructions: - Cover care: Remove all pillows, foam pad, and heating pad from cover. Place cover in washing machine on gentle and warm water. Please refer to manual for further instruction.

Ensure you have all the pieces of the electric heated bed prior to assembling. Unzip the zipper that lines the inside of the fabric. Begin by placing pillow (A) inside the front of the bed following the other three pillows (C), (B), and (D). Tip: Make sure to push the pillows into the corners of the fabric prior to zipping up the bed. To Ensure the pillows stay in place properly it's recommended to zip the cover after each section of the bed. Flip over the bed and unzip the back zipper on the bottom. Place the heating pad (F) inside of the bed. Place the foam pad (E) inside of the bed under the heating pad. The foam pad should be on the bottom closest to the ground. Then zip the back zipper closed with the cord and controller on the outside. Your PawsPik Electric Heated Pet Bed is Ready to be plugged in and used.