No Shock Rechargeable Bark Collar, Grey

For on leash training. Do not attach leash to bark collar. Use a regular collar in addition to the bark collar. Risk of skin damage. Please read and follow the instructions in this manual. Proper fit of the collar is important. A collar worn for too long or fitted too tight on the dog’s neck may cause skin damage. Ranging from redness to pressure ulcers; this condition is commonly known as bed sores.

*The device needs to be charged before using. *Factory default sensitivity level is 4 *Do not leave the collar on the dog for more than 12 hours per day. * When possible re-position the collar on the dog’s neck every 1 to 2 hours. * Check the fit to prevent excessive pressure; follow the instructions in this manual. * Never connect a leash to the electronic collar; it will cause excessive pressure on the contacts. * Wash the dog’s neck area and the contacts of the collar weekly with a damp cloth. * Examine the contact area daily for signs of a rash or a sore. * If a rash or sore is found, discontinue use of the collar until the skin has healed. If the condition persists beyond 48 hours, see your veterinarian. * If the barks time interval time over 40s, the device will revert to the first correction. *The device will enter sleep mode after 7 barks. * Please choose the correct length prong for the dog. *When the device is only beeping without any vibrations, it needs to be charged. *Note, you have the ability to change the length of the collar by cutting off the excess collar material and sealing the cut edge using a lighter flame for a few seconds to allow the edge to flatten.

Where is this made?

This collar is made in China and designed and tested to meet our high-quality standards.

What is the purpose of a training collar?

The Frisco Rechargeable No Shock Dog Bark Collar is designed to help with dog behavior correction training. Featuring two built-in modes to help correct barking behavior.

How does the collar work?

Make sure you read the Instruction Manual before setting up this collar!

The remote-free training collar is activated when your dog barks. There are 7 preset correction levels and 7 adjustable sensitivity levels to suit your needs. The higher the selected sensitive level, the more sensitive the collar will be to the sound. When your dog barks, the correction is activated; on the first 1-2 barks, beeps then a beep plus vibration for 3-7 barks

What are the 7 correction levels?

• 1st bark: Progressive warning beeps for 1.5 seconds
• 2nd bark: Progressive warning beeps for 2.5 seconds
• 3rd bark: sounds for 4 seconds + vibration for 0.5 seconds
• 4th bark: sounds for 4 seconds + vibration for 1 seconds
• 5th bark: sounds for 4 seconds + vibration for 1.5 seconds
• 6th bark: sounds for 4 seconds + vibration for 2 seconds
• 7th bark: sounds for 4 seconds + vibration for 2.5 seconds
• 8th bark: sleep mode for safety (for 1 minute)

Does this collar have a shock?

No, this is not a shock collar. This collar only provides sound and sound with vibration.

I have multiple dogs, how will the training collar know which dog is barking?

The microprocessor that controls the collar can distinguish your dog’s bark from other environmental noises and automatically deliver sound after each bark.

You can depend on the need and using the + and - button to select the right sensitivity level. The higher the sensitivity level, the more sensitive the collar will be to the sound around it.

Does the collar require a battery?

No, this collar is rechargeable.

Is the collar adjustable?

The collar is adjustable and will fit most dogs. Refer to the instruction manual for proper fitting procedures.

Can the collar be worn constantly?

Do not leave collar on for more than 6-10 hours. When possible, reposition the collar on the dog’s neck every 1-2 hours. A collar worn for too long or fitted too tight may cause skin damage. Examine skin daily for any irritation.

Does the collar have a D-ring for leashes?

No. Never connect a leash to an electronic collar due to risk of excessive pressure on the dog’s neck.

Follow the setup instruction and troubleshooting guide, if not successful, call the provided contact number, 1 (800) 672-4399, for assistance.