For first time use, test for colorfastness in an inconspicuous area before use. Certain stains may cause permanent discoloration and may be impossible to remove. Results may vary with carpets previously cleaned with surfactant-based carpet cleaners.
Where to use:
May be used with all types of liquid-extraction carpet cleaning equipment. May also be diluted for use as a traffic lane pre-spray, bonnet cleaner and/or spot remover on water safe carpet & upholstery.
How to apply:
Prior to cleaning, vacuum carpet thoroughly. Gently remove surface soils. Extract wet soils or blot up with a clean absorbent colorfast cloth. Try to keep as much of the soil as possible from penetrating into the carpet. Do not rub, as rubbing may alter the carpet texture.
Follow steps 1-3 for extraction cleaning. Note: Mix fresh dilutions daily.
STEP 1: Traffic Lane Pretreatment for Sprayer or Bonnet Cleaning Applications: Dilute 8 oz. per gallon of water (1:16) to pretreat heavy traffic areas. Apply using an industrial sprayer or bonnet cleaning machine following manufacturer's instructions. Wait 5 minutes until soil loosens. Continue with Steps 2 and 3.
STEP 2: Spot Remover (as needed): Dilute 4 oz. per gallon of water (1:32) in spray bottle. Adjust spray nozzle to spray position. Spray directly onto soiled area. Wait 5 minutes until soil loosens. Blot with a clean colorfast towel or continue with extraction cleaning. Continue with Step 3.
STEP 3: Extraction Cleaner: Recommended dilution is 2 oz. per gallon of water (1:64). Follow manufacturer's directions for specific machine used.