Instant Ocean Reef Salt for Aquariums, 160-gal

1. Mix Reef Crystals® with ordinary dechlorinated tap or purified water. NOTE: To prepare small quantities, use 1/2 cup of Reef Crystals per each U.S. gallon of water. Mix as directed.
2. Stir vigorously to ensure a good mix. Although the Reef Crystals solution may be used immediately, we suggest aerating the water until it achieves oxygen/carbon dioxide equilibrium.
3. Measure specific gravity with an Instant Ocean® Hydrometer.

Recommended Specific Gravity Range: 1.020-1.026 at 77°F. NOTE: 1.4 lbs of Reef Crystals is formulated to create 5 gallons of saltwater at a specific gravity of 1.021.

4. Adjust salt level accordingly. If specific gravity is too low, add more Reef Crystals. lf too high, add more dechlorinated water.
5. Change 20% of aquarium water every two weeks to maintain optimum water quality.

USAGE NOTE: NEVER mix salt in an aquarium containing animals.

In New Aquariums: Transfer animals to the aquarium AFTER salt is completely mixed and aerated and specific gravity has been adjusted.

Always add the salt mix to the water, not the other way around. Adding water to the salt mix briefly creates a highly concentrated solution that can lead to precipitation of some ingredients. Always allow newly mixed salt water to circulate with a powerhead or airstone at least overnight before use. This allows the carbon dioxide in the aquarium water to reach equilibrium with the carbon dioxide in the atmosphere, which normalizes pH. It also adds oxygen.

Instant Ocean® is formulated to provide a solution with levels of calcium and magnesium found in natural seawater (NSW), assuming you use purified water to dissolve the sea salt. Tap water most often contains dissolved calcium, magnesium and other minerals that will add to the levels provided by Instant Ocean®. The specific gravity of NSW is typically 1.026 (35 parts per thousand, or ppt, salinity). When dissolved in pure water to a specific gravity of 1.026, Instant Ocean® should provide a solution that has 400 mg/L calcium ion and 1320 mg/L magnesium ion. If Instant Ocean® is dissolved to a lower specific gravity, then these concentrations (and, in fact, the concentration of every other ion) will be proportionately lower.

The most common cause of poor solubility is moisture. Some of the compounds used in sea salts are hygroscopic, meaning they readily and quickly draw moisture from their surroundings. If your sea salt has any “clumps” or hardened sections, then this is a sure sign that moisture has been introduced. Sea salt that has absorbed moisture may dissolve with the addition of aeration. The best way to avoid moisture in your sea salt is to re-seal the container immediately after use.

Instant Ocean® has never contained a dechlorinator or any type of chelator. It is advisable to dechlorinate using a commercially available de-chlorinator when using tap water to dissolve Instant Ocean®.

Instant Ocean® is engineered to closely match natural seawater, and Reef Crystals® is enriched to facilitate the growth of corals and other invertebrates in a reef aquarium.