Frisco Water Resistant Bench Car Seat Cover
-
Price:
$17.99 FREE 1-3 dayShipping over $49
Oops! Something went wrong. Please try again.
Always say yes to bringing your pal along on all your car trips with the Frisco Water Resistant Bench Car Seat Cover. Made of heavy-duty Oxford polyester, this cover provides protection for your car seats from water, spills, stains and color-bleeding. Keeping your car seats protected from messes means more fun riding around together—from errands to road trips! Designed to fit the back seats of most cars, it’s easy to install in just three simple steps—lay the cover on the seat, loop the straps around the headrests and adjust for a snug fit, push the anchors through the seat gaps and you’re all set! Plus, it features convenient, closeable slits for easy seat belt access, and “seatbelt keepers” to hold the seat belt out of the way. It’s also machine washable for hassle-free cleanup.
Key Benefits- Protects your car’s back seats with heavy-duty Oxford polyester that’s resistant to water, spills, stains and color-bleeding.
- Designed to fit most car models, and is built with multiple attachment points and adjustable straps for a secure fit, plus seat anchors to minimize shifting.
- Installs in just three simple steps—loop straps around headrests, push anchors through seat gaps, and secure corner straps for added snugness (for some car models only).
- Accommodates a human companion or the use of pet vehicle restraint systems with easy-access, closeable seat belt slits; features “seat belt keepers”—flaps with a snap to hold the seat belt in place when not in use.
- Machine washable for easy cleanup so you can always be ready to hit the road with your pet.
-
Item Number143963
-
Dimensions47 x 56 inches
-
Weight1.98 pounds
-
BrandChewy Exclusives
-
Breed SizeAll Breeds
-
FeaturesSeat Belt Loop
-
MaterialNylon, Polyester
Promptly wipe up any foreign matter or standing liquid. Machine wash separately on gentle cycle in a front load washing machine. Use cold water with mild detergent. Do not bleach. Hang to dry. Always make sure the cover and vehicle seat are dry before installing the seat cover.
Fasten the cover on the back seat and headrests Lay the cover in place on the back seat, loop the straps over the headrests, and adjust the strap length for a secure fit around the headrest.
Secure with the seat anchors Locate the two seat anchors sewn to the back of the cover. Push each anchor into the gap between the rear seat’s back cushion and bottom cushion. The anchors can be removed with a strong tug, but hold firmly enough to keep the cover in place under normal use.
Anchor with bottom corner straps (used only on some car models) Find the two straps on the bottom corners of the cover and loop each one under the front corners of the seat. Adjust the straps for a snug fit (this is optional and might not work on some models if the seat is mounted to the vehicle floor.)

Ready. Sit. Go!
Protect your ride with the Frisco Car Seat Covers. Made of heavy-duty Oxford polyester, they resist water, spills and color-bleeding to safeguard your car seats. That means more car rides with your pal, from errands to expeditions! Go forth with less fuss—it's also machine washable which means no hassles over stains or messes for miles ahead.
The Right Fit for Most Rides
The Frisco Car Seat Covers are designed to fit most car models. They come in two styles—a bench and hammock for customized protection for your vehicle. Both options can be secured on the back seats with adjustable straps that loop around the headrests, and built-in seat anchors to prevent shifting. Plus, the quilted style has a non-slip mesh backing to help keep the cover in place.
Comfort Meets Convenience
The Frisco Car Seat Covers are designed to protect your car seats and make the ride more comfortable too—from pit stops to road trips. That's why they're equipped with seat belt slits for easy access, and fabric strips to hold the seat belts in place when not in use. Plus, they're available in quilted versions for added comfort, and the hammock style features handy pockets for easy stow and go.
Easy, Three-Step Installation
Get ready to go places because installing these seat covers is quick and easy. Step 1: With the cover on your back seat, loop adjustable straps around the headrests and fasten snugly. Step 2: Push the built-in cover anchors through the seat gaps to make sure the cover stays in place, even during bumpy rides. Step 3: Adjust the seatbelts through the access slits as needed, and get going!

STEP 1: LOOP

STEP 2: ANCHOR

STEP 3: ADJUST
Dog-Approved Features for the Road


About Frisco
Frisco's quality products are made for and by a family of pet lovers. And they're more than just everyday pet supplies. Crates become comforting kingdoms, potty pads transform into a favorite patch of grass, and potty bags give the signal that it's time to take care of business. From comfy mats and cat trees to potty time essentials, Frisco provides practical solutions for today's devoted pet parents. The entire Frisco line is available exclusively at Chewy.com!
Customer Reviews
95% Recommend
95% of reviewersrecommend this product
You've Already Reviewed This Item
128 Reviews
Showing 1-10 of 128 Reviews
-
Anchor strap broke
By Melatonin on Mar 2, 2021
While still functional, one strap anchoring the seat cover to the bottom portion of the seat broke during installation. I had tightened one corner, but it ripped out when I tightened the other side. It was my fault for using a lot of force, but I was shocked by how easily the strap tightened. I expected resistance. So, now, one corner is loose. Unfortunately, it’s the side my dog enters and exits from. I’m disappointed, but I will continue to use it. Otherwise, it’s a decent product that does the intended job. My dog doesn’t slide around on it the way he does on the leather seat, which was my goal.
-
Don't buy it!
By Doglover on Apr 5, 2021
Would not recommend this. It's cheaply made and your dog will hate it. After installing it in my 2017 Subaru Outback, I realized it doesn't fit very well and my dogs would have slid right off it as well. It's truly not something you want to put into your car or submit your animals to.
-
Exceeded my Expectations
By RaeRae on Mar 26, 2021
Had low expectations for this since it was so cheap but this works great! I love the seat anchors and the open spaces for seatbelts. I have a Lexus RX and it fits almost perfectly in my car - highly recommend for keeping dog hair off your seats!
-
Perfect seat cover
By Susan on Apr 10, 2021
This seat cover fits the bench seat of a 2019 Chevy Silverado perfectly. Good sturdy material. I definitely recommend this product and super price for the quality of the cover.
-
This is the One !
By JoeW on Mar 11, 2021
I searched all over and there are plenty of options out there. I could not be happier with this item. It fits my 2021 Honda Odyssey great. Fast shipping and the best price with surprising quality for such a modest price.
-
Love this car seat cover
By Teddy on Feb 27, 2021
Added this in my back seat and I am so relieved that in case my puppy has an accident that it won’t soil my seats. I am so glad I got this. He doesn’t mind it either. The price was great too.
-
Not so great
By Neal on Feb 19, 2021
It doesn't fit so good. The corners come up as the straps do not fit so well in my Honda Accord. the material is a little cheap feeling too. It does keep my seats clean so it works ok.
-
car seat cover
By cars on Mar 15, 2021
Fits in my Nissan Rogue perfectly, not slippery so my Aussie isn’t skidding around in the back. Protects everything it needs to
-
Great for muddy wet pup
By Reggiebean on Jan 3, 2021
It's exactly what we need, whether our pup rolls around in grass and mud or goes to the beach. Keeps our car "clean". The only thing less ideal is that it is slippery so our pup has slipped a few times. But it holds well to the seats in the car and fits our Honda CRV well
-
Multi functional
By Beck on Dec 28, 2020
I actually purchased these for a seasonal job delivering packages so my seats wouldn’t get damaged. They arrived within 2 days which was a really nice surprise. It’s only been two weeks but so far working perfectly. It would be nice to have options made in the USA.