K&H Pet Products Extreme Weather Kitty Pad Petite, Tan

Usage Instructions:

1. Place the Extreme Weather Kitty Pad™ directly on a hard, flat surface in your home or inside a cat house. The area chosen should be sheltered from direct rain or snow.
2. Plug into 110 - 120 volt AC outlet. Allow 1 - 2 hours for the Extreme Weather Kitty Pad™ to warm. The unit will feel slightly warm to the touch. When an animal lies on the pad, it will reach a maximum temperature of approximately 102° F. The built-in thermostat will automatically regulate the temperature.
3. After initial warm-up, your Extreme Weather Kitty Pad™ will feel cooler to the touch. This is the intention for energy efficiency. When your pet lies on the bed, it will warm to a comfortable temperature in even the coldest of weather.

Cleaning Instructions: Wash the faux fleece cover on the gentle cycle with cold water, then line dry.

The heated pad can be cleaned using a damp towel or sponge and mild dish washing detergent. DO NOT wash in a washing machine.

Testing Your Extreme Weather Kitty Pad: You can test the pad by placing a large pillow on top of the pad. After about 20 minutes, feel under the pillow. It will feel warm, not hot. DO NOT use an extension cord during this test. DO NOT place anything on the pad (other than the fleece cover provided) any other time. This should only be done during testing.

The Extreme Weather Kitty Pad is made from a hard ABS plastic whereas the Lectro-Soft is a foam based bed. They both function the same and heat to 102°F.

For larger sizes, please look at our Lectro-Kennel. While its packaging shows a dog, the heating pad is identical and available in 3 sizes. And since dogs and cats have the same natural body temperature of 102°F, it can be used for either animal.

Yes, this item may be placed in a cardboard box.

K&H outdoor beds and pads are designed to warm to your pet's normal body temperature of 102°F when he/she lies on the bed or pad. When your pet is not on the bed or pad, the heat will dissipate into the air and the surface temperature will vary according to the ambient air temperature.

Our beds and pads are NOT pressure sensitive. All K&H heated beds and pads feature dual thermostats and are designed to warm to your pet's normal body temperature when he/she lies on the pad. This is a function of the insulation provided by a pet’s body, not the weight of the pet.K&H beds and pads will emit heat anytime they are plugged in so your pet can sense that heat and be drawn to the bed or pad for warmth and comfort. When your pet is not on the pad, the heat will dissipate into the air and the surface temperature will vary according to the ambient air temperature.

All of our heated products are thermostatically controlled to heat to 102°F, regardless of the size. The variation in wattage is directly related to the size and the wattage necessary to heat that size bed to 102°F.

The cord is 5.5 feet long.

MET requires that all manufacturers put the extension cord statement “Do not use with extension cord” on every item that is MET listed by UL 499 standards. This is because they cannot test every extension cord on the market in conjunction with our products for safety. Also, MET suggests that an extension cord is not recommended as a permanent fixture and should only be a temporary solution when using any electrical product.Temporary use of a UL listed cord is fine, but consult your electrician for the proper cord for your application.

MET Safety Laboratories suggests unplugging the bed if you leave your home on an extended vacation, as they do with any electrical appliance. Otherwise, it is designed for 24/7 operation and you can leave it plugged in all day. This item has been certified by MET labs to adhere to strict electrical safety standards.

There is not an off/on switch. The pad is always on when plugged in.

You never want to place anything on top of a K&H outdoor bed or pad other than the cover provided. This cover allows the warmth to go through whereas a blanket or any other cover will trap the heat inside the bed or pad, possibly causing a malfunction.

Outdoor heated pet beds and pads should be placed on a flat, stable surface rather than on top of a bed or blanket.

Our outdoor heated beds and pads are water-resistant. We understand that pets collect snow and water from being outdoors. Our products are designed to be used safely with pets, even when the pet is water-soaked.Please make sure to place the bed or pad in a relatively dry area such as a covered porch, garage, kennel or dog house. The bed or pad should not be placed where there is a potential for standing water from heavy rain and the product should not be immersed in water.

Our heated beds require direct contact with an animal's body and do not provide radiant heat. For these reasons, we only recommend placing a heated bed or pad on the floor or sidewall where the dog’s body will come in direct contact with the product.

Yes, you can use K&H outdoor heated beds and pads with or without the included cover.

For a garage, we recommend an outdoor heated product. They have the features necessary to ensure your pet stays warm in even the coldest of temperatures.

If your pet urinates on a K&H heated bed or pad, he/she will not suffer any harm.