Autoslide Motion Sensing Dog Door

The door can stay open when required by pressing the mode button to Hold Open Mode. A blue light will be displayed. In Pet Mode, you can program Autoslide to open the door to a width that suits the size of your pet. Once programmed, you have the option of leaving the Autoslide in Pet Mode, which will only open the door to the pre-programmed width you have set. In Automatic Mode, the door will automatically open and then time out and close automatically. Stacker Mode keeps the door fully open. A remote connected to the Stacker Port can operate the door like a garage door, leaving it open partially. Secure mode is designed for use with iLocking units. Pet and Outside sensors are disabled, open-assist is disabled, and the door is locked.

This model includes the Autoslide Dog Door system and the Motion Sensors. The door system is available in either black or white while the motion sensors are available in black only. When mounting the Autoslide Pet Motion Sensor, it is best to place it on the wall or door’s jamb so that the IR beam shoots across the door. You will want to make sure the beam is the same height as your pet’s body for consistent activation. For a fully automatic pet door, a motion sensor must be mounted on the inside and outside of the home. We also carry other Autoslide models (sold separately) which include K9 Collar Tag and/or the Autoslide iLock Smart Tag Pet Door Kit.

If using on a door with more than 2 panels, all panels should be locked in place other than the single panel this is being attached to.

This motion sensing door system is not designed to operate using an App.